3d printing

Anycubic Photon Ultra DLP Launches on Kickstarter

Pursuing on the success of their Photon resin printer series, Shenzhen-based printing device manufacturer Anycubic has announced they are releasing another iteration, dubbed the Anycubic Photon Ultra , on Kickstarter. This one has eschewed LCD technology in favor of the latest DLP chip from Texas Instruments, so will offer you higher quality images with less energy use.

The initial Photons have found a sizable following with both designers and researchers likewise because of its low cost, high res and compatibility with a variety of resins.

The most recent Photon machine from Anycubic offers all of this and a lot more. Let’s have a look at what is on offer.

Great things about DLP

The Anycubic Photon Ultra includes a print level of 102.4 mm (L) * 57.6 mm (W) * 165mm (H), and thanks to use with their new DLP display from Texas Musical instruments, is with the capacity of printing at 720p quality. Most budget-friendly desktop SLA systems use LCD screens, which has a volume of downsides in comparison to DLP systems.

The change to DLP technology from LCD brings a number of benefits such as: low to no maintenance, extremely high-resolution designs, and far lower power intake.

DLP printers use a projector that reflects all the light to a pixel with a micromirror, therefore, there is absolutely no light convergence, which allows for crisper dark-colored/white contrasts. LCD printers converge all the light to a pixel, which can cause bumps and shadows on the border of models. When showing thin lines and small-size text messages, DLP printers are clearer than LCD printers with purer colors and richer layers, resulting in more delicate structure and sharper corners of models.

Therefore, a DLP printing device with 720p resolution can provide a higher quality printing when compared to a monochrome LCD printer with a 2k or 4k resolution. The 16 x anti-aliasing on the Photon Ultra really helps to even the corners and corners of designs, which reduces covering lines, also increasing the grade of the printing.

Lower Maintenance

LCD monitors naturally, degrade as time passes. They degrade within an even quicker time when working with them in 3D printers, where constant use can lead to LCDs being replaced every 3-5 weeks.

LCD crystal substrates found in LCD displays degrade under the UV light typically used for resin stamping. This is inescapable, no matter the quality of your LCD display screen.

LCD monitors are therefore, similar to the photopolymer resins they are used to remedy, a consumable. And consumables equivalent bills. In short, utilizing the DLP technology, you’ll be reducing your bills on consumable items. The Texas Equipment DLP technology will not suffer these same issues since it doesn’t use liquid crystals, and the internal projector permits the printing device to be utilized for more than 20,000 hours. Over that point an average individual would save $600 utilizing the long-life DLP system in comparison to an LCD-based one.

The Photon Ultra costs significantly less than 500 cash on Kickstarter, so that’s not really a bad saving.

Quieter, Faster, BETTER

The Photon Ultra operates at 40% light efficiency, which is 15 times greater than the two 2.5-3% that LCD printers usually operate at. It uses much less energy and it is scored at 12W with the average vitality ingestion of 8.5W. The printer consumes between 0.017 – 0.034 kWh to print a 100mm high model. The lower electric power intake equals less heat, which means the Photon Ultra doesn’t need any cooling fans, which makes it very tranquil indeed.

As stated earlier in this article, the prior Anycubic Photon models have been popular with researchers due to their compatibility with a variety of resins. The Photon Ultra has options for versatile UV ability, which enables users to keep to experiment and find out new resin applications.

The most recent Photon gets a acceleration raise as well, with the Photon Ultra being with the capacity of printing at 1.5 seconds per layer. This is compared to LCD printers including the Anycubic Photon Mono X, whose quickness is 1.5 – 2s per part. The Photon Ultra can printing up to 5x faster than more traditional point source of light type SLA producing.

Where to get it

Anycubic’s Photon Ultra is releasing on Kickstarter on September 14th, 2021, where it will be designed for pre-order in a worldwide exclusive. The plan will run for a duration of one month, where early on backers will have the ability to acquire at the start price and also avail of other benefits and bonus products. The release price is $399 for the first 100 backers and $499 from then on.

It’ll retail on Amazon for over $599 following the Kickstarter advertising campaign, so head to their Kickstarter web page and get a orders in if you want to take good thing about the first buyer benefits, or if you want to see the full features of the new DLP system from Anycubic.